SMT X-ray inspection NDT Non Destructive Testing

Original: SMT BGA solder ball inspection method - Know about cost Usually, when we check the soldering status of BGA solder balls, we can usually check them with  X-ray inspection machine  If we want to check if the solder balls lack solder or cracks/weld bridge/short defects. BGA solder ball inspection Basically ,There are three ways to check the solderability of BGA, using X-rays, Red Dye Penetration Test and slicing. Before you want to analyze the welding status of the BGA, it is recommended that you use  X-ray machine  to see if you can see any problems. The other two methods continue to be used only when X-Ray is unable to determine the problem. There is also a way to use optical instruments to inspect BGA solder balls, such as microscopes or fiber optic miniature cameras, but since the BGA spacing is getting smaller, it usually only checks the two rows of BGAs. Tin ball, another is a bit difficult, so we won’t introduce it here. In fact, there is als...

X ray inspection machine + printer + scanner https://www.youtube.com/watch?v=S4Td_QJem94

Why IGBT is expensive？ See IGBT X ray imaging, Know it is deserve to buy?

AOI & X-ray Inspection Equipment Advantages AOI (Auto Optical Inspection), It has been widely used in the circuit board assembly line of the electronics industry, and has replaced the previous manual visual inspection operations. AOI uses imaging technology, to determine whether the object under test conforms to the standard based on whether there is a large difference, between the object to be measured and the standard image. Now and In the past Of AOI Before, AOI was used to detect whether the surface printing of the IC (integrated circuit) package was defective. As the technology evolved, Now it was used to detect the PCB assembly on the quality status of SMT assembly line, or check whether the solder paste meets the standards after printing. The biggest advantage of AOI is that it can replace the manual visual inspection before and after  SMT reflow soldering , and it can judge the shortcomings of SMT assembly assembly more accurately than the huma...

Automatic SMD chip Counting machine, compared with Manuel SMD reel machine （Manual operation by 10 worker）, The cost of the machine can be recovered within 15-18 months. and the  x ray counting machine can use more than 5 years. whatsapp /Wechat +861877997930

Seamark ZM X RAY inspection machine X6600 inspect the Car electronics Parts，from the video，you can see very clear image of Car electronics Parts .Now X ray inspection machine has been widely applied to do the capacitor, battery, LED, SMT, BGA, CSP, Flip Chip Inspection.If you friend need it,and more detail information, welcome to contact us： Skype/whatsapp/wechat:+8618779975930