Why Inspect Components IC?

https://www.seamarkxray.com/inspect-components-ic/

Quality is First!

Component placement inspection has become even more critical over the past decade due to package sizes getting smaller and smaller. The key to a successful yield improvement strategy is understanding these placement defects and creating a proactive approach to process control.

Learn why you should Inspect your Components IC

· Yield Improvement Strategies

First sample PCB test-Use x ray machine to detect quality problems and control quality issues from the root cause.

AOI and SPI is important for PCB surface, But for PCB inside quality, X ray machine is necessary for factory that requires quality.

· Stamp out Rework

If it can control quality problem at the first, rework process can be save a lot of time, repair material and manpower.

For repair, recommend ZM R7830A BGA rework station, Flextronics, DELTA, SONY, and so on are using it, demo video: https://youtu.be/j6lcbA-bB8o

· Return on Investment

For ROI of x ray machine, it can’t be calculated, SMT PCB is mass production, PCB value is difficult to estimate, and closed tube x Ray machine can be used for 12-15 years.

· Billions of Solder Joints

The article is reproduced in ASC International